DIAPHRAGM VALVES ( WEIR TYPE)

 

Special Features of “SUMKA”  Diaphragm Valve

         *    Lifetime Construction & Moving parts Completely enclosed               

         *    Cast Iron Diaphragm Housing and space saving Design

                 *    No Stem packing or stuff box

                 *    Easy Diaphragm Replacement.

 

                                 

 

 

                               Dimensional Detail      Application      Catalogue

 

      Standard Material of Construction

Description Material 1 Body Cast iron/FG 200 2 Lining Ebonite Rubber 3 Diaphragm Neoprene Rubber 4 Bonnet Cast iron/FG 200 5 Compressor Alu.  for 15 to 50NB Cast Iron above 65NB 6 Compressor Bush MS for 200NB above 7 Stem SS 401 8 Stem Bush SG Iron 9 Stem Extension SS 401 for above150NB 10 Thrust Bearing MS above 80NB 11 Compressor Pin MS upto 25NB SS 304 above 32NB 12 Grub Screw with Locknut MS 13 Lub Fitting Brass 14 Handwheel Cast iron/FG 200 15 Stud/Bolt Galvanized Steel 16 Nut Galvanized Steel   ·        Other Material Available against specific requirements

 

Pressure testing    Kg/cm2 Type 15mm to 25mm 32mm to 50mm 65mm to 100mm 125mm & 150mm 200mm 250mm 300mm Body 21 18 15.75 13.25 10.50 7.50 6.50 Seat 14 12 10.50 8.75 7.00 5.00 4.25 Air Seat 5.00 5.00 5.00 5.00 5.00 5.00 5.00

 

 

 

 

 

 

Over All Dimensions

	Size "MM"	A	B	T	Weight KG
	15	114	83	3	2.4
	20	123	90	3	3.0
	25	133	102	3	4.3
	32	152	110	3	5.5
	40	165	141	3	7.2
	50	196	153	3	10.5
	65	222	172	3	15.5
	80	261	221	3.5	25.5
	100	312	243	3.5	37.6
	125	364	296	4	62
	150	414	348	4	86.5
	200	531	470	5	163
	250	645	559	5	265
	300	759	651	5	450